Skip to main content

CurryKitten

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me

Tag: flight controller

Using the DShot Beeper in Betaflight – a quick and easy guide

8th February 201923rd January 2020 CurryKitten 1 Comment

Update: June 2019 At some point (I didn’t quite notice when, I just noticed it one day) the ability to setup Dshot beeper via the configuration tab was added in.  It certainly saves messing around with the CLI, and so is recommended.  I’m leaving the remainder of the original text as it was for reference […]

Read More

Taming Acro Flying in Betaflight (From Drone May 2018)

29th August 201829th August 2018 CurryKitten Leave a comment

Or as Drone renamed it “Aerial Acrobat:  The smart way to tame manual flight” which is another nice title, but doesn’t quite tell you what it’s about on a blog.  This was the first of two articles I wrote for Drone for the May issue, and also included one of my pictures as the front […]

Read More

Taking the DShot, or how to use Betaflight DShot commands (from Drone April 2018)

27th August 201827th August 2018 CurryKitten 2 Comments

In this piece for Drone, I took some of the knowledge that I had learned from doing a YouTube review on the Diatone GTR-90.  A lovely design of micro quad, but one that didn’t allow room for a beeper, and so I looked into how to use the DShot commands in order to give me […]

Read More

Skyhook Discovery 2.6 Build – Part 3 (Installing electronics, finishing the wings)

23rd June 201830th August 2018 CurryKitten Leave a comment

After installing (most) of the servos in the last part of this build, I seemed to be caught up in a circular dependency situation where everything I wanted to start installing seemed to depend upon another already being present.  I had the flap servos, receiver and VTX to install but how could I do this […]

Read More

The History of FPV

10th December 201710th December 2017 CurryKitten 9 Comments

I’ve done a bit of work for RC magazines over the past few years, and one of the most interesting bits to write was a piece I was asked to do for “RC Flight Camera Action” magazine on the history of FPV.  I’ve been FPVing since 2012, and have been around long enough to see […]

Read More

Getting the RSSI value to show in your Betaflight’s OSD (FrSky based)

26th July 201711th July 2018 CurryKitten 11 Comments

I had a question pop up a few days ago in the form of a YouTube comment.  It was how did I get the RSSI value to show in my OSD on one of my Mini-Quads.  In this particular case, I was using the MicroMinimOSD with the MWOSD firmware, but even with the newer flight […]

Read More

Search

Want to be notified when new content is published ?

Recent Posts

  • Open.HD a new Setup and Config guide
  • Setting up a GPS with Betaflight
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio
  • Using the DShot Beeper in Betaflight – a quick and easy guide
  • GepRC MX3 Sparrow review (from Drone May 2018)

Categories

  • Article (10)
  • Builds (12)
  • Magazine (8)
  • Reviews (6)
  • Setup (6)
  • Tutorial (11)
  • Uncategorised (3)

Gearbest Get ready for Gearbest 4th Anniversary promotion

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
Theme by Colorlib Powered by WordPress