Skip to main content

CurryKitten

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me

Tag: quad

GepRC MX3 Sparrow review (from Drone May 2018)

5th November 20185th November 2018 CurryKitten Leave a comment

This was the second piece from Drone Magazine for May 2018, and was the cover picture.  It was also a case of being able to reuse assets I’d created when reviewing for YouTube.  Since I started writing as well, from this point onwards I’ve always taken stills of anything that could be reviewed as I […]

Read More

Taming Acro Flying in Betaflight (From Drone May 2018)

29th August 201829th August 2018 CurryKitten Leave a comment

Or as Drone renamed it “Aerial Acrobat:  The smart way to tame manual flight” which is another nice title, but doesn’t quite tell you what it’s about on a blog.  This was the first of two articles I wrote for Drone for the May issue, and also included one of my pictures as the front […]

Read More

Taking the DShot, or how to use Betaflight DShot commands (from Drone April 2018)

27th August 201827th August 2018 CurryKitten 2 Comments

In this piece for Drone, I took some of the knowledge that I had learned from doing a YouTube review on the Diatone GTR-90.  A lovely design of micro quad, but one that didn’t allow room for a beeper, and so I looked into how to use the DShot commands in order to give me […]

Read More

“Lost & Found” – How not to lose your Quad (from Drone March 2018)

23rd August 201823rd August 2018 CurryKitten Leave a comment

This was my first article for Drone Magazine, which I was very happy to be featured in as it’s a very high quality glossy magazine which is really nicely put together, and the fact that Painless360 already wrote regularly for them had put me off talking to them previously.  But having done the Let’s Drone […]

Read More

Extreme Fliers Micro Drone 3.0+ Combo review (from DroneZone April/May 2018)

22nd August 201822nd August 2018 CurryKitten 1 Comment

Here’s something I certainly wouldn’t have chosen to ever fly or review, but DroneZone sent it over and asked me to write a review on it, which I did…. and spoiler alert, I hated it.  It was way over priced, used old technology, and worst of all it managed to get $3M from an Indigogo […]

Read More

ImmersionRC 150 review (from DroneZone December/January 2018)

17th June 201817th June 2018 CurryKitten 1 Comment

This Vortex 150 review was originally written for RC Flight Camera Action, before it went under.  See my previous entry on the Taranis QX7 review for more details on this.  As it had been sent to me by ImmersionRC to use in the magazine, this was a slight pain that this took so long after […]

Read More

The History of FPV

10th December 201710th December 2017 CurryKitten 9 Comments

I’ve done a bit of work for RC magazines over the past few years, and one of the most interesting bits to write was a piece I was asked to do for “RC Flight Camera Action” magazine on the history of FPV.  I’ve been FPVing since 2012, and have been around long enough to see […]

Read More

Adding the RunCam Micro Swift camera to a Micro quad

21st September 201728th September 2017 CurryKitten 4 Comments

If there’s one thing the current crop of micro quads have in common (and for the purposes of discussion, I’ll class micro quads as up to 130mm motor-to-motor) it’s the quality of the camera in the all-in-one VTX/Camera combos. That’s not to say they are awful – in fact that fact we get a tiny camera […]

Read More

Moving from the Aurora 100 to a Firer 110 Frame

2nd August 20172nd August 2017 CurryKitten Leave a comment

The Aurora 100 has become my favorite quad, after getting one sort of out of the blue from Banggood to review…. and that’s not just favorite micro quad, I mean quad of all dimensions.  I was out a few weeks ago flying with my friend Neil (he also had an Aurora) when disaster finally struck.  We […]

Read More

Getting the RSSI value to show in your Betaflight’s OSD (FrSky based)

26th July 201711th July 2018 CurryKitten 11 Comments

I had a question pop up a few days ago in the form of a YouTube comment.  It was how did I get the RSSI value to show in my OSD on one of my Mini-Quads.  In this particular case, I was using the MicroMinimOSD with the MWOSD firmware, but even with the newer flight […]

Read More

Posts pagination

1 2 Older posts

Search

Want to be notified when new content is published ?

Recent Posts

  • Open.HD a new Setup and Config guide
  • Setting up a GPS with Betaflight
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio
  • Using the DShot Beeper in Betaflight – a quick and easy guide
  • GepRC MX3 Sparrow review (from Drone May 2018)

Categories

  • Article (10)
  • Builds (12)
  • Magazine (8)
  • Reviews (6)
  • Setup (6)
  • Tutorial (11)
  • Uncategorised (3)

Gearbest Get ready for Gearbest 4th Anniversary promotion

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
Theme by Colorlib Powered by WordPress