Skip to main content

CurryKitten

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me

Tag: tutorial

Open.HD a new Setup and Config guide

28th July 202128th July 2021 CurryKitten Leave a comment

About a year ago I made 3 videos about Open.HD and they are still sat there on YouTube if you’d like to take a look. in the first video, I talk about what Open.HD is and what sort of equipment we’ll need to get the system set up. In the next video, I connected everything […]

Read More

Using the DShot Beeper in Betaflight – a quick and easy guide

8th February 201923rd January 2020 CurryKitten 1 Comment

Update: June 2019 At some point (I didn’t quite notice when, I just noticed it one day) the ability to setup Dshot beeper via the configuration tab was added in.  It certainly saves messing around with the CLI, and so is recommended.  I’m leaving the remainder of the original text as it was for reference […]

Read More

Taming Acro Flying in Betaflight (From Drone May 2018)

29th August 201829th August 2018 CurryKitten Leave a comment

Or as Drone renamed it “Aerial Acrobat:  The smart way to tame manual flight” which is another nice title, but doesn’t quite tell you what it’s about on a blog.  This was the first of two articles I wrote for Drone for the May issue, and also included one of my pictures as the front […]

Read More

Taking the DShot, or how to use Betaflight DShot commands (from Drone April 2018)

27th August 201827th August 2018 CurryKitten 2 Comments

In this piece for Drone, I took some of the knowledge that I had learned from doing a YouTube review on the Diatone GTR-90.  A lovely design of micro quad, but one that didn’t allow room for a beeper, and so I looked into how to use the DShot commands in order to give me […]

Read More

“Lost & Found” – How not to lose your Quad (from Drone March 2018)

23rd August 201823rd August 2018 CurryKitten Leave a comment

This was my first article for Drone Magazine, which I was very happy to be featured in as it’s a very high quality glossy magazine which is really nicely put together, and the fact that Painless360 already wrote regularly for them had put me off talking to them previously.  But having done the Let’s Drone […]

Read More

Adding the RunCam Micro Swift camera to a Micro quad

21st September 201728th September 2017 CurryKitten 4 Comments

If there’s one thing the current crop of micro quads have in common (and for the purposes of discussion, I’ll class micro quads as up to 130mm motor-to-motor) it’s the quality of the camera in the all-in-one VTX/Camera combos. That’s not to say they are awful – in fact that fact we get a tiny camera […]

Read More

Getting the RSSI value to show in your Betaflight’s OSD (FrSky based)

26th July 201711th July 2018 CurryKitten 11 Comments

I had a question pop up a few days ago in the form of a YouTube comment.  It was how did I get the RSSI value to show in my OSD on one of my Mini-Quads.  In this particular case, I was using the MicroMinimOSD with the MWOSD firmware, but even with the newer flight […]

Read More

Martian III Quad build – Part 2

23rd June 201723rd June 2017 CurryKitten 4 Comments

In the first part of the build, we discussed the parts I gathered to build the Martian III, so let’s actually get on and put it together now.  First off, this means disassembling most of the frame down again – just leaving the legs and the base plate – I’ve done this so I can […]

Read More

Getting iNav ready for the SkyHook Discovery 2.6 – enter the cardboard V-Tail

20th June 201730th August 2018 CurryKitten 8 Comments

Last month I got the biggest plane I’d ever held in my hands for a review.  This is the Skyhook Discovery 2.6.  It’s a really quite stunning 2.6m motor-glider that’s made of balsa and composite and has been careful thought out for flying FPV.  It is huge, but thankfully it all breaks back down a […]

Read More

Martian III Quad build – Part 1

17th June 201723rd June 2017 CurryKitten 3 Comments

I’ve had a whole bunch of 200-250 sized quads that I’ve build, and all of them have been your standard H-style.  It’s not a bad thing, they are great flying quads, and the install is pretty easy.  That said though, I’ve always fancied flying more of a “proper” X-quad, so having a look through the […]

Read More

Search

Want to be notified when new content is published ?

Recent Posts

  • Open.HD a new Setup and Config guide
  • Setting up a GPS with Betaflight
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio
  • Using the DShot Beeper in Betaflight – a quick and easy guide
  • GepRC MX3 Sparrow review (from Drone May 2018)

Categories

  • Article (10)
  • Builds (12)
  • Magazine (8)
  • Reviews (6)
  • Setup (6)
  • Tutorial (11)
  • Uncategorised (3)

Gearbest Get ready for Gearbest 4th Anniversary promotion

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
Theme by Colorlib Powered by WordPress