Skip to main content

CurryKitten

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
  • Open.HD a new Setup and Config guide

    About a year ago I made 3 videos about Open.HD and they are still sat there on YouTube if you’d like to take a look. in the first video, I talk about what Open.HD is and what sort of equipment we’ll need to get the system set up. In the next video, I connected everything […]
  • Setting up a GPS with Betaflight

    There’s a whole bunch of reasons why you might want a GPS receiver on your Betaflight quad. It might be for helping you know where you are in long-range endeavors, liking the fuzzy warm feeling of having a home arrow, or the increased safety aspect of having the GPS rescue mode available. I’ve already made […]
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio

    Going on for around a year ago, I made a YouTube video to provide a small tutorial on how to enable D8 on an LBT radio. Typically, your Taranis X9D or QX7 radios. Since that time, FrSky developed their ACCESS protocol, and the radios that support it, don’t support the D8 protocol. In fact, in […]
  • Using the DShot Beeper in Betaflight – a quick and easy guide

    Update: June 2019 At some point (I didn’t quite notice when, I just noticed it one day) the ability to setup Dshot beeper via the configuration tab was added in.  It certainly saves messing around with the CLI, and so is recommended.  I’m leaving the remainder of the original text as it was for reference […]
  • GepRC MX3 Sparrow review (from Drone May 2018)

    This was the second piece from Drone Magazine for May 2018, and was the cover picture.  It was also a case of being able to reuse assets I’d created when reviewing for YouTube.  Since I started writing as well, from this point onwards I’ve always taken stills of anything that could be reviewed as I […]

The MiniRaceWing build and FPV maiden

14th July 201714th July 2017 CurryKitten Leave a comment

I’ve been championing the MiniRaceWing for a while now.  For those not familiar with the background, it started as a Kickstarter project for a new type of wing.  The basic premise was to use a mini-quad like carbon fiber centre section with wings that would detach in a crash to avoid any damage.  I made a […]

Read More

Skyhook Discovery 2.6 Build – Part 1 (Mounting the motor)

29th June 201730th August 2018 CurryKitten 2 Comments

I’d touched on the Skyhook Discovery back in a previous post, and if you’d watched the accompanying video, then you’ll know that I was nervous about building it.  Basically, I didn’t want to screw the build up, and destory what is a lovely looking model.  I guess the build intimidates me a little because it’s […]

Read More

Martian III Quad build – Part 3

25th June 201714th July 2017 CurryKitten 2 Comments

In the previous part of the build, we’d installed all the electronics into the frame, and had pretty much completed the physical build – I’d stopped at the top plate and it’s four risers just so they weren’t in the way for heat shrinking the ESCs.  We’ll come to that part in a little while, […]

Read More

Martian III Quad build – Part 2

23rd June 201723rd June 2017 CurryKitten 4 Comments

In the first part of the build, we discussed the parts I gathered to build the Martian III, so let’s actually get on and put it together now.  First off, this means disassembling most of the frame down again – just leaving the legs and the base plate – I’ve done this so I can […]

Read More

Getting iNav ready for the SkyHook Discovery 2.6 – enter the cardboard V-Tail

20th June 201730th August 2018 CurryKitten 8 Comments

Last month I got the biggest plane I’d ever held in my hands for a review.  This is the Skyhook Discovery 2.6.  It’s a really quite stunning 2.6m motor-glider that’s made of balsa and composite and has been careful thought out for flying FPV.  It is huge, but thankfully it all breaks back down a […]

Read More

Martian III Quad build – Part 1

17th June 201723rd June 2017 CurryKitten 3 Comments

I’ve had a whole bunch of 200-250 sized quads that I’ve build, and all of them have been your standard H-style.  It’s not a bad thing, they are great flying quads, and the install is pretty easy.  That said though, I’ve always fancied flying more of a “proper” X-quad, so having a look through the […]

Read More

Hello, and welcome to the blog

16th June 201720th June 2017 CurryKitten Leave a comment

Look, I’ll be honest.  This post was just designed as a test entry to see if things are working… so it’ll probably disappear soon as more content is added.  But for now I like the picture 😉

Read More

Posts pagination

Newer posts 1 2 3

Search

Want to be notified when new content is published ?

Recent Posts

  • Open.HD a new Setup and Config guide
  • Setting up a GPS with Betaflight
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio
  • Using the DShot Beeper in Betaflight – a quick and easy guide
  • GepRC MX3 Sparrow review (from Drone May 2018)

Categories

  • Article (10)
  • Builds (12)
  • Magazine (8)
  • Reviews (6)
  • Setup (6)
  • Tutorial (11)
  • Uncategorised (3)

Gearbest Get ready for Gearbest 4th Anniversary promotion

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
Theme by Colorlib Powered by WordPress