Skip to main content

CurryKitten

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
  • Open.HD a new Setup and Config guide

    About a year ago I made 3 videos about Open.HD and they are still sat there on YouTube if you’d like to take a look. in the first video, I talk about what Open.HD is and what sort of equipment we’ll need to get the system set up. In the next video, I connected everything […]
  • Setting up a GPS with Betaflight

    There’s a whole bunch of reasons why you might want a GPS receiver on your Betaflight quad. It might be for helping you know where you are in long-range endeavors, liking the fuzzy warm feeling of having a home arrow, or the increased safety aspect of having the GPS rescue mode available. I’ve already made […]
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio

    Going on for around a year ago, I made a YouTube video to provide a small tutorial on how to enable D8 on an LBT radio. Typically, your Taranis X9D or QX7 radios. Since that time, FrSky developed their ACCESS protocol, and the radios that support it, don’t support the D8 protocol. In fact, in […]
  • Using the DShot Beeper in Betaflight – a quick and easy guide

    Update: June 2019 At some point (I didn’t quite notice when, I just noticed it one day) the ability to setup Dshot beeper via the configuration tab was added in.  It certainly saves messing around with the CLI, and so is recommended.  I’m leaving the remainder of the original text as it was for reference […]
  • GepRC MX3 Sparrow review (from Drone May 2018)

    This was the second piece from Drone Magazine for May 2018, and was the cover picture.  It was also a case of being able to reuse assets I’d created when reviewing for YouTube.  Since I started writing as well, from this point onwards I’ve always taken stills of anything that could be reviewed as I […]

Skyhook Discovery 2.6 Build – Part 3 (Installing electronics, finishing the wings)

23rd June 201830th August 2018 CurryKitten Leave a comment

After installing (most) of the servos in the last part of this build, I seemed to be caught up in a circular dependency situation where everything I wanted to start installing seemed to depend upon another already being present.  I had the flap servos, receiver and VTX to install but how could I do this […]

Read More

ImmersionRC 150 review (from DroneZone December/January 2018)

17th June 201817th June 2018 CurryKitten 1 Comment

This Vortex 150 review was originally written for RC Flight Camera Action, before it went under.  See my previous entry on the Taranis QX7 review for more details on this.  As it had been sent to me by ImmersionRC to use in the magazine, this was a slight pain that this took so long after […]

Read More

Taranis QX7 review (from DroneZone October/November 2017)

14th June 201817th June 2018 CurryKitten Leave a comment

Not exactly topical is it a Taranis QX7 review, and even at the time of publication, it had been out a while.  This review and another on the ImmersionRC Vortex 150 had a bit of a troubled journey into publication.                       RC Flight Camera Action […]

Read More

New magazine content on it’s way

14th June 201814th June 2018 CurryKitten Leave a comment

If you’ve noticed that the blog has been slightly lacking any update lately, well…. it has.   Why is that?  Well, I’ve been ramping up my YouTube videos and also doing a lot more writing work for magazines. I do find writing quite challenging, but rewarding.  It’s sometimes very tricky to communicate quite technical ideas through […]

Read More

The History of FPV

10th December 201710th December 2017 CurryKitten 9 Comments

I’ve done a bit of work for RC magazines over the past few years, and one of the most interesting bits to write was a piece I was asked to do for “RC Flight Camera Action” magazine on the history of FPV.  I’ve been FPVing since 2012, and have been around long enough to see […]

Read More

A new page appears – what’s the Coupons / Deals page all about ?

8th November 20178th November 2017 CurryKitten Leave a comment

You may have noticed a new “Coupons / Deals” page link appear in the menu.  “What’s this all about ?”, are the voices I hear in my head. Well, the nice folks at Gearbest asked me if I would like some coupon deals for my blog, and I said – absolutely I would.  So if […]

Read More

Adding the RunCam Micro Swift camera to a Micro quad

21st September 201728th September 2017 CurryKitten 4 Comments

If there’s one thing the current crop of micro quads have in common (and for the purposes of discussion, I’ll class micro quads as up to 130mm motor-to-motor) it’s the quality of the camera in the all-in-one VTX/Camera combos. That’s not to say they are awful – in fact that fact we get a tiny camera […]

Read More

Moving from the Aurora 100 to a Firer 110 Frame

2nd August 20172nd August 2017 CurryKitten Leave a comment

The Aurora 100 has become my favorite quad, after getting one sort of out of the blue from Banggood to review…. and that’s not just favorite micro quad, I mean quad of all dimensions.  I was out a few weeks ago flying with my friend Neil (he also had an Aurora) when disaster finally struck.  We […]

Read More

Getting the RSSI value to show in your Betaflight’s OSD (FrSky based)

26th July 201711th July 2018 CurryKitten 11 Comments

I had a question pop up a few days ago in the form of a YouTube comment.  It was how did I get the RSSI value to show in my OSD on one of my Mini-Quads.  In this particular case, I was using the MicroMinimOSD with the MWOSD firmware, but even with the newer flight […]

Read More

Skyhook Discovery 2.6 Build – Part 2 (Installing the servos)

24th July 201730th August 2018 CurryKitten 2 Comments

Next part of the Skyhook build was the servo installation.  On your regular foamy style plane, it’s a job that takes a few minutes – often you can just pop the servos straight into a pre-cut hole, maybe you’ll need to trim a little extra out.  With the Skyhook, there’s a little more to do. […]

Read More

Posts pagination

Newer posts 1 2 3 Older posts

Search

Want to be notified when new content is published ?

Recent Posts

  • Open.HD a new Setup and Config guide
  • Setting up a GPS with Betaflight
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio
  • Using the DShot Beeper in Betaflight – a quick and easy guide
  • GepRC MX3 Sparrow review (from Drone May 2018)

Categories

  • Article (10)
  • Builds (12)
  • Magazine (8)
  • Reviews (6)
  • Setup (6)
  • Tutorial (11)
  • Uncategorised (3)

Gearbest Get ready for Gearbest 4th Anniversary promotion

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
Theme by Colorlib Powered by WordPress