In this final build part of the Skyhook, there wasn’t actually much left to do. The electronics were mostly in place, but there were just some annoying pieces to tick off the list. First up was the camera mount. To start with, we had a slightly confusing set of parts along with my camera – […]
Tag: skyhook
Skyhook Discovery 2.6 Build – Part 3 (Installing electronics, finishing the wings)
After installing (most) of the servos in the last part of this build, I seemed to be caught up in a circular dependency situation where everything I wanted to start installing seemed to depend upon another already being present. I had the flap servos, receiver and VTX to install but how could I do this […]
Skyhook Discovery 2.6 Build – Part 2 (Installing the servos)
Next part of the Skyhook build was the servo installation. On your regular foamy style plane, it’s a job that takes a few minutes – often you can just pop the servos straight into a pre-cut hole, maybe you’ll need to trim a little extra out. With the Skyhook, there’s a little more to do. […]
Skyhook Discovery 2.6 Build – Part 1 (Mounting the motor)
I’d touched on the Skyhook Discovery back in a previous post, and if you’d watched the accompanying video, then you’ll know that I was nervous about building it. Basically, I didn’t want to screw the build up, and destory what is a lovely looking model. I guess the build intimidates me a little because it’s […]
Getting iNav ready for the SkyHook Discovery 2.6 – enter the cardboard V-Tail
Last month I got the biggest plane I’d ever held in my hands for a review. This is the Skyhook Discovery 2.6. It’s a really quite stunning 2.6m motor-glider that’s made of balsa and composite and has been careful thought out for flying FPV. It is huge, but thankfully it all breaks back down a […]