Skip to main content

CurryKitten

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me

Author: CurryKitten

The MiniRaceWing build and FPV maiden

14th July 201714th July 2017 CurryKitten Leave a comment

I’ve been championing the MiniRaceWing for a while now.  For those not familiar with the background, it started as a Kickstarter project for a new type of wing.  The basic premise was to use a mini-quad like carbon fiber centre section with wings that would detach in a crash to avoid any damage.  I made a […]

Read More

Skyhook Discovery 2.6 Build – Part 1 (Mounting the motor)

29th June 201730th August 2018 CurryKitten 2 Comments

I’d touched on the Skyhook Discovery back in a previous post, and if you’d watched the accompanying video, then you’ll know that I was nervous about building it.  Basically, I didn’t want to screw the build up, and destory what is a lovely looking model.  I guess the build intimidates me a little because it’s […]

Read More

Martian III Quad build – Part 3

25th June 201714th July 2017 CurryKitten 2 Comments

In the previous part of the build, we’d installed all the electronics into the frame, and had pretty much completed the physical build – I’d stopped at the top plate and it’s four risers just so they weren’t in the way for heat shrinking the ESCs.  We’ll come to that part in a little while, […]

Read More

Martian III Quad build – Part 2

23rd June 201723rd June 2017 CurryKitten 4 Comments

In the first part of the build, we discussed the parts I gathered to build the Martian III, so let’s actually get on and put it together now.  First off, this means disassembling most of the frame down again – just leaving the legs and the base plate – I’ve done this so I can […]

Read More

Getting iNav ready for the SkyHook Discovery 2.6 – enter the cardboard V-Tail

20th June 201730th August 2018 CurryKitten 8 Comments

Last month I got the biggest plane I’d ever held in my hands for a review.  This is the Skyhook Discovery 2.6.  It’s a really quite stunning 2.6m motor-glider that’s made of balsa and composite and has been careful thought out for flying FPV.  It is huge, but thankfully it all breaks back down a […]

Read More

Martian III Quad build – Part 1

17th June 201723rd June 2017 CurryKitten 3 Comments

I’ve had a whole bunch of 200-250 sized quads that I’ve build, and all of them have been your standard H-style.  It’s not a bad thing, they are great flying quads, and the install is pretty easy.  That said though, I’ve always fancied flying more of a “proper” X-quad, so having a look through the […]

Read More

Hello, and welcome to the blog

16th June 201720th June 2017 CurryKitten Leave a comment

Look, I’ll be honest.  This post was just designed as a test entry to see if things are working… so it’ll probably disappear soon as more content is added.  But for now I like the picture 😉

Read More

Posts pagination

Newer posts 1 2 3

Search

Want to be notified when new content is published ?

Recent Posts

  • Open.HD a new Setup and Config guide
  • Setting up a GPS with Betaflight
  • Using SPI receivers with an ACCESS/ACCST LBT/EU radio
  • Using the DShot Beeper in Betaflight – a quick and easy guide
  • GepRC MX3 Sparrow review (from Drone May 2018)

Categories

  • Article (10)
  • Builds (12)
  • Magazine (8)
  • Reviews (6)
  • Setup (6)
  • Tutorial (11)
  • Uncategorised (3)

Gearbest Get ready for Gearbest 4th Anniversary promotion

  • About
  • Support Me
  • YouTube
  • CurryKitten FPV Sim Mobile Edition
  • Facebook
  • Contact Me
Theme by Colorlib Powered by WordPress