After installing (most) of the servos in the last part of this build, I seemed to be caught up in a circular dependency situation where everything I wanted to start installing seemed to depend upon another already being present. I had the flap servos, receiver and VTX to install but how could I do this […]
Author: CurryKitten
ImmersionRC 150 review (from DroneZone December/January 2018)
This Vortex 150 review was originally written for RC Flight Camera Action, before it went under. See my previous entry on the Taranis QX7 review for more details on this. As it had been sent to me by ImmersionRC to use in the magazine, this was a slight pain that this took so long after […]
Taranis QX7 review (from DroneZone October/November 2017)
Not exactly topical is it a Taranis QX7 review, and even at the time of publication, it had been out a while. This review and another on the ImmersionRC Vortex 150 had a bit of a troubled journey into publication. RC Flight Camera Action […]
New magazine content on it’s way
If you’ve noticed that the blog has been slightly lacking any update lately, well…. it has. Why is that? Well, I’ve been ramping up my YouTube videos and also doing a lot more writing work for magazines. I do find writing quite challenging, but rewarding. It’s sometimes very tricky to communicate quite technical ideas through […]
The History of FPV
I’ve done a bit of work for RC magazines over the past few years, and one of the most interesting bits to write was a piece I was asked to do for “RC Flight Camera Action” magazine on the history of FPV. I’ve been FPVing since 2012, and have been around long enough to see […]
A new page appears – what’s the Coupons / Deals page all about ?
You may have noticed a new “Coupons / Deals” page link appear in the menu. “What’s this all about ?”, are the voices I hear in my head. Well, the nice folks at Gearbest asked me if I would like some coupon deals for my blog, and I said – absolutely I would. So if […]
Adding the RunCam Micro Swift camera to a Micro quad
If there’s one thing the current crop of micro quads have in common (and for the purposes of discussion, I’ll class micro quads as up to 130mm motor-to-motor) it’s the quality of the camera in the all-in-one VTX/Camera combos. That’s not to say they are awful – in fact that fact we get a tiny camera […]
Moving from the Aurora 100 to a Firer 110 Frame
The Aurora 100 has become my favorite quad, after getting one sort of out of the blue from Banggood to review…. and that’s not just favorite micro quad, I mean quad of all dimensions. I was out a few weeks ago flying with my friend Neil (he also had an Aurora) when disaster finally struck. We […]
Getting the RSSI value to show in your Betaflight’s OSD (FrSky based)
I had a question pop up a few days ago in the form of a YouTube comment. It was how did I get the RSSI value to show in my OSD on one of my Mini-Quads. In this particular case, I was using the MicroMinimOSD with the MWOSD firmware, but even with the newer flight […]
Skyhook Discovery 2.6 Build – Part 2 (Installing the servos)
Next part of the Skyhook build was the servo installation. On your regular foamy style plane, it’s a job that takes a few minutes – often you can just pop the servos straight into a pre-cut hole, maybe you’ll need to trim a little extra out. With the Skyhook, there’s a little more to do. […]